Mvci Driver For Toyota-cable 2.0.1
MVCI Driver for Toyota Cable 2.0.1: How to Install and Use
If you have a Mini VCI cable and want to use it with Toyota Techstream software, you need to install the MVCI driver for Toyota cable 2.0.1. This driver allows your computer to communicate with the cable and the vehicle's diagnostic system. In this article, we will show you how to install and use the MVCI driver for Toyota cable 2.0.1 on Windows 10 64-bit.
What is MVCI Driver for Toyota Cable 2.0.1?
MVCI driver for Toyota cable 2.0.1 is a software package that enables the Mini VCI J2534 interface to work with Toyota Techstream software. The Mini VCI cable is a low-cost diagnostic tool that supports Toyota vehicles from 1996 to 2020. It can perform various functions such as reading and clearing trouble codes, viewing live data, performing active tests, programming keys, resetting maintenance lights, and more. The Toyota Techstream software is the official diagnostic software used by Toyota dealers and technicians. It provides access to all the diagnostic features and functions of the vehicle's electronic control units (ECUs).
Download: https://t.co/W6M9hZiSaT
How to Install MVCI Driver for Toyota Cable 2.0.1?
To install the MVCI driver for Toyota cable 2.0.1, you need to follow these steps:
Download the MVCI driver for Toyota cable 2.0.1 from [this link] and unzip it to a folder on your computer.
Plug in your Mini VCI cable and wait for Windows to recognize it and load the drivers.
Open the device manager (Win Key+X then select Device Manager) and open the node "Ports (COM & LPT)" and double click the "USB Serial Port (COM?)" device, and then go to the "Driver" tab.
Click on "Update Driver" and then select "Browse my computer for driver software".
Browse to the folder where you unzipped the MVCI driver for Toyota cable 2.0.1 and select it.
Click on "Next" and follow the instructions to install the driver.
Once the driver is installed, you should see a message saying "Windows has successfully updated your driver software".
Close the device manager and restart your computer.
How to Use MVCI Driver for Toyota Cable 2.0.1?
To use the MVCI driver for Toyota cable 2.0.1, you need to have the Toyota Techstream software installed on your computer. You can download the latest version of Techstream from [this link] and follow the instructions to install and activate it. Once you have Techstream installed, you can use it with your Mini VCI cable by following these steps:
Connect your Mini VCI cable to your vehicle's OBD-II port and to your computer's USB port.
Open Techstream software on your desktop.
If Techstream asks you to enter an activation key, press Cancel.
Select Setup tab->VIM Select interface as Xhorse MVCI and press OK.
Select Connect to Vehicle tab and choose your vehicle's model, year, and engine type.
Wait for Techstream to initialize the USB communication and establish a connection with your vehicle.
Select System Selection tab and choose the system you want to diagnose or program.
Select Health Check tab to perform a full scan of your vehicle's ECUs and display any trouble codes or faults.
Select Utility tab to perform various functions such as resetting maintenance lights, programming keys, performing active tests, etc.
Select Data List tab to view live data from your vehicle's sensors and actuators.
Select Customization tab to change various settings of your vehicle's features and functions.
Conclusion
MVCI driver for Toyota cable 2.0.1 is a necessary software package that enables you to use your Mini VCI cable with Toyota Techstream software on Windows 10 64-bit. By installing and using this driver, you can access all the diagnostic features and functions of your Toyota vehicle and perform various tasks such as reading and clearing trouble codes, viewing live data, performing active tests, programming keys, resetting maintenance lights, and more. If you have any questions or problems with the MVCI driver for Toyota cable 2.0.1, please feel free to contact us for help.